REFCOM Air Conditioning Installer: UK Guide 2026
Check Your Eligibility for Boiler Upgrade Scheme (BUS)
Complete your details below to check your eligibility.
Thank you
We've received your details and will be in touch shortly.
Quick Answer: What Is a REFCOM Air Conditioning Installer?
A REFCOM air conditioning installer is a business registered through REFCOM’s F-gas company certification scheme to carry out covered work on stationary refrigeration, air-conditioning or heat-pump equipment containing, or designed to contain, fluorinated greenhouse gases.
That company registration is separate from the engineer’s personal F-gas qualification.
For homeowners, the practical check is therefore two-part: confirm that the business holds current company certification and that the person carrying out regulated refrigerant work has the correct individual qualification.
REFCOM provides a public company register. Importantly, UK rules require appropriate company certification rather than REFCOM specifically. GOV.UK currently lists other approved certification bodies as well.
REFCOM Air Conditioning Installer: What It Means and How to Check One in the UK
If you are looking for a REFCOM air conditioning installer, you are probably trying to answer one practical question: can this company legally and competently carry out refrigerant work on your air-conditioning system?
For many fixed split and multi-split systems using fluorinated refrigerants, there are two separate credentials to understand. The business needs suitable company F-gas certification, while the engineer carrying out regulated refrigerant work needs the appropriate personal qualification.
REFCOM is one approved route for company certification. However, it is not the only approved certification body in the UK.
This guide explains what REFCOM registration means, how to check an installer, what REFCOM Elite adds and what else you should compare before accepting an air-conditioning quote.
If you are ready to compare options, you can compare free home-improvement quotes through Get Free Quote and then verify the credentials, specification and warranty offered by each contractor.
What Does REFCOM Certification Actually Mean?
REFCOM operates an F-gas company certification scheme for businesses working in refrigeration, air conditioning and heat pumps.
GOV.UK states that companies, including sole traders, must hold appropriate company certification when carrying out covered installation, repair, maintenance and decommissioning work on stationary equipment containing F-gas for other people. Businesses must demonstrate that they have enough trained personnel and suitable procedures for handling F-gases while minimising emissions.
See the official GOV.UK company F-gas certification guidance.
That matters because refrigerant work is not simply general plumbing, electrical or building work. Joining, opening, charging, recovering from or otherwise working on a regulated refrigerant circuit can bring specific legal requirements.
However, REFCOM registration should not be treated as a universal guarantee of installation quality.
It does not tell you whether the unit has been sized correctly, whether drainage has been designed properly or whether the quotation provides good warranty and aftercare. Those points still need checking separately.
Is REFCOM Registration Mandatory for Air Conditioning Installers?
Company F-gas certification may be mandatory, but REFCOM itself is not the only approved route.
GOV.UK currently lists REFCOM Certification Ltd, F-Gas Register operated by Quidos and Bureau Veritas UK Ltd as company certification bodies for stationary refrigeration, air conditioning and heat-pump work. GOV.UK also states that company certification must be renewed every three years.
An installer can therefore hold valid company F-gas certification without appearing on the REFCOM register if another approved body issued its certificate.
For homeowners, a better question than simply asking “Are you REFCOM registered?” is:
“Which approved body provides your current company F-gas certification, and what qualification will the engineer working on my system hold?”
That gives you a much clearer answer.
Company Certification vs Engineer Qualification
| Credential | Who holds it? | What it shows | What to check |
|---|---|---|---|
| Company F-gas certification | Business or sole trader | Business is certified for relevant F-gas activities | Certification body, company identity and current status |
| Individual F-gas qualification | Engineer or technician | Person is qualified for relevant refrigerant work | Qualification and permitted activities |
| REFCOM Elite | Business | Voluntary scheme demonstrating standards beyond basic F-gas registration | Useful extra evidence, but not a substitute for required certification |
GOV.UK states that people working on equipment containing F-gas must hold their own appropriate qualifications, even when working for someone else. The permitted activities differ according to the qualification category.
You can check the current requirements in the GOV.UK F-gas qualification guidance.
This distinction is important. A certified business does not remove the requirement for appropriately qualified people to perform regulated work.
How to Check a REFCOM Air Conditioning Installer
1. Search the official REFCOM register
REFCOM maintains a Registered Company Search where businesses can be checked by company name or postcode.
Use the REFCOM Registered Company Search rather than relying only on a logo displayed on an installer website, quotation or vehicle.
Check that the listed company matches the business you are actually contracting with.
2. Ask who will carry out the refrigerant work
A company may employ several engineers or use subcontractors.
Ask who will attend your property and whether that person holds the appropriate F-gas qualification.
REFCOM’s guidance also confirms that subcontractors carrying out covered work need appropriate company certification rather than simply relying on the main contractor’s certificate.
3. Check the business name carefully
The name on your quotation and invoice should make sense when compared with the certified business.
Trading names, subsidiaries and subcontracting arrangements can make this less obvious. Ask for clarification if the company taking your money is different from the business whose certification you have checked.
4. Verify credentials before paying a large deposit
Checking certification before committing is much easier than resolving questions after installation has begun.
If a contractor will not identify its certification body or explain who will perform the refrigerant work, investigate further before signing.
What Should a Qualified Air-Conditioning Installer Actually Do?
Certification is important, but installation quality also depends on design.
A contractor should assess the room or property rather than selecting a unit using floor area alone. Cooling demand can change significantly with glazing, orientation, shading, insulation, ceiling height, occupancy and heat-producing appliances.
For more detail, see the air-conditioning sizing UK guide.
The installer should also consider:
indoor-unit position;
outdoor-unit location and airflow;
refrigerant pipe routes;
condensate drainage;
electrical supply and isolation;
maintenance access;
indoor and outdoor noise;
manufacturer installation requirements.
Once installed, the system must be tested and commissioned correctly before handover.
If you are comparing equipment as well as installers, the best air-conditioning brands UK guide covers the product side of the decision.
What Should You Compare Beyond REFCOM Certification?
Treat F-gas certification as an essential compliance check where it applies, rather than the entire buying decision.
| Check | Why it matters |
|---|---|
| Cooling-load assessment | Reduces the risk of over- or undersizing |
| Exact make and model | Allows proper like-for-like quote comparison |
| Pipework and drainage | Affects appearance, reliability and installation difficulty |
| Electrical work | Clarifies whether circuits or isolators are included |
| Commissioning | Confirms the finished system has been tested and set up |
| Manufacturer warranty | Shows what product faults are covered |
| Workmanship guarantee | Covers installation-related defects |
| Servicing and aftercare | Important if problems occur later |
For the broader fitting process, read the air-conditioning installation UK guide.
If your main concern is finding contractors covering your postcode, the air-con installers near me guide focuses on shortlisting and comparing local companies.
A useful written quote should identify the equipment, capacity, installation scope, electrical work, drainage, commissioning, warranty and major exclusions.
Price becomes much easier to compare once the scope is clear.
Can I Buy a Split System and Ask a REFCOM Installer to Connect It?
Do not assume an installer will accept a customer-supplied or partly completed system.
UK guidance states that before non-hermetically sealed equipment containing F-gas is sold to an end user, the seller must obtain details of the qualified technician who will install it and check those details.
See the official GOV.UK guidance on selling F-gas equipment.
An installer may also refuse to commission work they did not design or fit themselves. Manufacturer warranty arrangements can add further conditions.
If you intend to buy the equipment yourself or complete preparatory work, agree exactly what the certified contractor will accept before ordering the system.
What Is REFCOM Elite?
REFCOM Elite is different from standard company F-gas certification.
REFCOM describes Elite as a voluntary scheme for businesses that want to demonstrate standards beyond basic compliance. Its requirements include additional evidence around competence, refrigerant handling, recovery equipment and working practices.
You can read the REFCOM Elite scheme information.
Elite status can therefore be a useful positive signal, but it does not remove the need to compare design quality, quotation detail, warranty, reviews and aftercare.
REFCOM also states that businesses do not need dual F-gas registration with multiple schemes merely to obtain additional legal status.
Get Your Free Air Source Heat Pump Quote
Find the right air source heat pump solution for your home. Tell us a few details and our team will help you explore suitable options at a competitive price.
Quick to complete. No obligation.
Get your quote
Enter your details below and one of our team will get back to you.
Frequently asked questions
Find clear answers to common questions about REFCOM air conditioning installers, including F-gas company certification, individual qualifications, REFCOM Elite, sole traders, subcontractors, electrical work and choosing a compliant installer.
REFCOM is a UK F-gas company certification body serving businesses working with refrigeration, air-conditioning and heat-pump equipment.
It is normally an air-conditioning business holding REFCOM company F-gas certification for covered activities involving equipment containing or designed to contain regulated F-gases.
No. REFCOM can provide company certification. Engineers carrying out regulated refrigerant work need their own appropriate individual qualifications.
No. Where company F-gas certification is required, REFCOM is one approved certification body. GOV.UK currently lists other approved bodies as well.
Yes, when they carry out work covered by the F-gas qualification requirements. GOV.UK says individuals must have the appropriate qualifications for the activities they perform.
Search the business name or postcode through REFCOM's public Registered Company Search.
GOV.UK says company certification must be renewed every three years.
REFCOM F-Gas relates to company certification. REFCOM Elite is a voluntary scheme intended to demonstrate additional standards and best practice.
No. REFCOM describes Elite as a voluntary scheme rather than the basic legal company-certification requirement.
No. It verifies an important compliance requirement but does not guarantee correct sizing, neat workmanship, good customer service or strong aftercare.
Where the covered company-certification requirements apply, GOV.UK explicitly includes sole traders.
REFCOM states that subcontractors carrying out covered stationary refrigeration, air-conditioning or heat-pump work must hold appropriate company certification.
For non-hermetically sealed equipment containing F-gas, sellers must obtain details of the qualified technician who will install the equipment and check those details before selling it to the end user.
Discuss this with the certified contractor before starting. An engineer may refuse to connect or commission work they have not installed or cannot satisfactorily inspect.
No. Electrical competence and F-gas competence are separate issues. Relevant refrigerant work requires the appropriate F-gas qualification.
Not by itself. The electrical portion of an air-conditioning installation has its own competence and regulatory requirements.
You can check at any stage, but verification is particularly useful before accepting a quotation or paying a substantial deposit.
Compare system sizing, exact equipment, warranty, workmanship guarantee, electrical work, drainage, commissioning, insurance, reviews and aftercare alongside certification.
Final Checklist: Choosing a REFCOM Air Conditioning Installer
Before booking, confirm five things:
The business has current company F-gas certification from REFCOM or another approved body.
The engineer doing regulated refrigerant work has the appropriate individual qualification.
The proposed system has been properly assessed for your property.
The written quotation explains equipment, pipework, drainage, electrics, commissioning, warranty and exclusions.
You know who will handle servicing, installation faults and warranty issues after handover.
A REFCOM listing is useful because it lets you verify an important part of installer compliance.
However, the best contractor is not simply the one displaying the right badge. Look for valid credentials and a well-designed system, clear documentation and accountable aftercare.
If you are ready to proceed, compare several properly specified quotations before deciding which installer offers the strongest overall proposal.