Solar Installation Quotes UK: 2026 Comparison Guide
Check Your Eligibility for Boiler Upgrade Scheme (BUS)
Complete your details below to check your eligibility.
Thank you
We've received your details and will be in touch shortly.
Quick answer: how should you compare solar installation quotes?
Get at least three written quotes and put them on the same basis. Compare total solar capacity in kWp, expected annual generation, exact panel and inverter models, battery specification if included, scaffolding, electrical work, DNO responsibilities, warranties and full installed price. Ask what is excluded and whether any figures could change after a site survey.
Energy Saving Trust currently puts a typical 4.5kWp home solar PV system at around £7,600 installed. Treat that as a sense-check, not a target price. Your roof, access, system size and equipment can change the final quotation. Energy Saving Trust
Solar Installation Quotes UK: How to Compare Prices, Systems and Installers in 2026
Solar installation quotes can vary by thousands of pounds even when installers are looking at the same home. They may be pricing different system sizes, panels, inverters, batteries, scaffolding, electrical work and warranty packages.
The cheapest headline figure is not automatically the best deal. A useful quote should tell you what is being installed, what the system is expected to generate, what work is included, what remains provisional and what protection you have if something goes wrong.
For UK homeowners comparing solar installation quotes in 2026, the key checks are system capacity in kWp, predicted annual generation in kWh, exact equipment models, installation scope, warranties, installer credentials and payment terms. Energy Saving Trust also recommends getting three quotes from MCS-certified installers. Energy Saving Trust
If you are ready to compare options, the Get Free Quote homepage can help you explore suitable solar installation quotes without committing to an installation.
How much should a solar installation quote cost in 2026?
Energy Saving Trust currently estimates that an average domestic solar PV system is around 4.5kWp and costs about £7,600 to install. The Department for Energy Security and Net Zero also publishes official cost-per-kW statistics based on the MCS Installation Database. Energy Saving Trust
A quote above or below the national average is not automatically unreasonable. Small or awkward roofs can cost more per kWp because scaffolding, design and electrical work are spread across fewer panels. Roof repairs, difficult access, premium equipment or battery storage can also raise the total.
Ask for the solar-only price and any battery cost separately. This makes it much easier to compare the core PV installation fairly.
Qualifying installed energy-saving materials, including solar panels, currently benefit from 0% VAT until 31 March 2027. Under current legislation, the reduced 5% rate is due to apply from 1 April 2027. Check the latest guidance if your installation is close to that date. GOV.UK
For more detail on price benchmarks, read the Get Free Quote solar panel cost guide.
What should a solar installation quote include?
A quotation should be specific enough that another installer could price the same job. If you only receive a total price and a panel count, you do not yet have enough information for a meaningful comparison.
| What to check | What a useful quote should show | Why it matters |
|---|---|---|
| Solar array | Number of panels, exact model and total kWp | Lets you compare capacity rather than panel count alone |
| Generation | Estimated annual output in kWh and key assumptions | Helps you judge whether the forecast is credible |
| Inverter | Make, model, type and rated output | Affects system design and future battery options |
| Battery | Make, model and usable capacity in kWh, if included | Avoids comparing different storage sizes as equal |
| Installation | Scaffolding, mounting, cabling and electrical work | Exposes possible extra charges |
| Grid connection | Who handles DNO notification or application | Clarifies responsibility |
| Warranties | Panel, inverter, battery and workmanship cover | Shows what is protected |
| Price and terms | Total price, VAT treatment, deposit and payment stages | Makes the commitment clear |
Do not accept vague descriptions such as “premium panels” without a complete model number. Different products from the same manufacturer can have different efficiency ratings, dimensions and warranties.
If panel choice matters to you, compare the proposed models with the best solar panels for UK homes guide.
How to compare solar installation quotes like for like
Start with the total array size in kWp. Ten 500W panels create a 5kWp array, while ten 430W panels create 4.3kWp. Panel count alone can therefore mislead.
A useful first-pass calculation is the solar-only installed price divided by array capacity. A £7,500 solar-only quote for 4.5kWp is about £1,667 per kWp. This does not decide which quote is best, but it helps reveal outliers.
Next, compare expected annual generation. Two installers modelling the same roof should use broadly similar information about location, orientation, pitch, shading and system losses. If one predicts far more electricity from a similar-sized array, ask why.
Then compare the installation scope. One installer may include scaffolding, monitoring and a consumer-unit upgrade. Another may list them as extras. The cheaper headline quote can become the more expensive project once exclusions are added.
Finally, ask why the proposed system size suits your home. A larger system may make sense if you have an EV, heat pump or rising electricity use, but more capacity is not automatically better.
Check the generation estimate before believing the savings figure
Current MCS solar PV requirements require an estimate of annual total generation and self-consumption before the contract is awarded. MCS also makes clear that solar performance cannot be predicted with certainty because sunlight varies by location and year. MCS Certified
Generation is the electricity the panels are expected to produce. Self-consumption is the share you are expected to use in your home rather than export.
Savings depend on both figures, plus your electricity tariff and any export payment. The Smart Export Guarantee allows eligible solar generators to receive payments for exported electricity, but suppliers set their own tariff terms and rates. Ofgem
Ask which electricity price, export rate and self-consumption percentage were used. If a battery is included, ask how it changes those assumptions instead of accepting one headline payback figure.
You can also use the Energy Saving Trust solar calculator as an independent sense-check.
Why the site survey can change a solar quote
A desktop quote is useful early on, but it is based on assumptions. A property survey can reveal roof defects, shading, awkward scaffolding, difficult cable routes or electrical work that satellite imagery cannot confirm.
A good survey should confirm roof condition, usable area, orientation, pitch, structural suitability, shading, electrical equipment and suitable positions for the inverter and any battery.
If the survey changes the design, ask for the revised specification and price in writing before signing or paying further money.
The solar panel installation survey guide explains what should be checked before the design becomes final.
Check installer credentials, payment terms and protection
Energy Saving Trust recommends getting three quotations from MCS-certified installers. Check an installer’s current status rather than relying only on a logo in a brochure. Energy Saving Trust
There is an important 2026 detail here. MCS is moving installers to its redeveloped scheme between February 2026 and 31 March 2027. Under the previous scheme, approved Consumer Code membership was mandatory; under the redeveloped scheme it is no longer automatically required. Therefore, Consumer Code membership and MCS status should now be checked separately. MCS Certified
The Renewable Energy Consumer Code advises consumers to get at least three quotes, avoid pressure-selling and not pay more than 25% of the contract price upfront. It also recommends checking how deposits are protected. Renewable Energy Consumer Code
For a fuller credential checklist, see the MCS-certified solar installers guide.
Solar quote warning signs
Be cautious if a salesperson refuses to name the exact equipment, promises guaranteed savings, pressures you to sign on the same day or offers a large “today only” discount.
Other warning signs include no generation estimate, unclear exclusions, unexplained provisional costs, a very large deposit or vague warranty responsibility.
A very low quote deserves the same scrutiny as a very high one. Ask what has been removed, downgraded or left provisional.
How to choose the best-value solar installation quote
Use this seven-step decision process:
- Give each installer the same information about your home, electricity use and future plans.
- Compare total system capacity in kWp, not just panel count.
- Check the annual generation estimate and its assumptions.
- Compare exact panel, inverter and battery models with their warranties.
- Confirm scaffolding, electrical work, grid-connection tasks and certification are included.
- Review installer credentials, payment protection and aftercare.
- Choose the proposal with the clearest design and strongest long-term value, not simply the lowest price.
Solar is a long-term home investment. A detailed quotation helps you understand what you are buying and gives you a clearer written specification if a dispute arises later.
Get Your Free Air Source Heat Pump Quote
Find the right air source heat pump solution for your home. Tell us a few details and our team will help you explore suitable options at a competitive price.
Quick to complete. No obligation.
Get your quote
Enter your details below and one of our team will get back to you.
Frequently asked questions
Find clear answers to common questions comparing air source and ground source heat pumps, including efficiency, installation and running costs, winter performance, noise, land requirements and borehole depth.
Get at least three. Both Energy Saving Trust and RECC recommend comparing multiple quotations before signing a contract.
Energy Saving Trust currently gives around £7,600 for a typical 4.5kWp domestic system. Your property-specific price can differ significantly.
No. Compare system capacity, equipment, predicted generation, installation scope, warranties and exclusions alongside price.
Kilowatt-peak, or kWp, is the rated output of the solar array under standard test conditions. It is more useful for comparing system size than panel count alone.
They may use different assumptions for roof orientation, pitch, shading, system losses or panel layout. Ask each installer to explain the assumptions behind its kWh forecast.
It should be clear whether scaffolding is included. Never assume it is part of the headline price.
Yes. Separate pricing makes it easier to compare the underlying solar installation and decide whether storage offers sufficient value.
It can provide a useful estimate, but a survey may reveal roof, access, shading or electrical issues that alter the design or price.
Treat guaranteed-looking savings cautiously. Generation varies and financial savings depend on electricity prices, self-consumption and export income. MCS itself states that performance estimates are not guarantees.
Qualifying installed solar panels currently benefit from 0% VAT until 31 March 2027. Under current rules, the rate is due to become 5% from 1 April 2027.
Energy Saving Trust recommends getting quotes from MCS-certified installers. Always verify current certification rather than relying on marketing material.
Check panel product and performance warranties, inverter cover, battery cover where relevant and the installer’s workmanship warranty. Treat them as separate protections.
RECC advises consumers not to pay more than 25% of the contract value upfront and to confirm how advance payments are protected.
Yes, particularly if the survey finds roof, structural, access or electrical issues. Ask for every change to the specification and price in writing before proceeding.
Eligible generators can receive payment for electricity exported under the Smart Export Guarantee. Tariff rates and contract terms vary between suppliers.
Conclusion
The best solar installation quote is not necessarily the cheapest. It is the one that clearly explains system size, equipment, expected generation, installation work, warranties, responsibilities and total cost.
Use national figures only as a benchmark. Compare at least three property-specific proposals, question unusual assumptions and insist that changes after the survey are documented in writing.
When you are ready, compare suitable solar options and decide whether the numbers work for your property.